PSI63C0.630-W1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
12 Seconds
The Bosch Rexroth Indramat PSI63C0.630-W1 is a medium frequency inverter from the PSI Frequency Inverters series. It features a water cooled design, operates on a mains voltage of 400 to 480 VAC at either 50 or 60 Hz, and provides an integrated power supply output of 24 VDC at a maximum 2 Amps. With an IP20 degree of protection, this inverter has a maximum cooling loss of 420 Watts and weighs approximately 25 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PSI63C0.630-W1 belongs to the PSI Frequency Inverters series produced by Bosch Rexroth Indramat. Classified by the manufacturer as a medium-frequency inverter, it converts three-phase supply power into the controlled output required for induction heating, hardening, or similar automation processes where high oscillation rates are needed. The unit fits cabinets that accommodate water connections for its liquid-cooling circuit and is intended for environments where cabinet airflow is limited or contaminated.
This inverter connects to mains rated at 400–480 VAC and accepts supply frequencies of 50 or 60 Hz, making it compatible with common industrial power systems worldwide. Heat generated by the IGBT stack is removed through a water-cooled plate, preventing hot-spot formation and stabilizing semiconductor junction temperatures. The housing carries an IP20 degree of protection, so it must be installed inside an electrical enclosure but still guards against accidental contact with live parts. The cooling system must dissipate up to 420 W of thermal loss, a value needed for chiller sizing. Control integration is handled through a DeviceNet timer interface. The electronic assembly is suitable for the 3K3 climatic category outlined in EN 60721-3-3, supporting operation in production rooms with moderate dust and humidity.
An internal auxiliary supply provides 24 VDC with a maximum current of 2 A. This rail powers contactors, sensors, and the DeviceNet node without requiring an external supply. Continuous service is supported within an ambient temperature range of +10 to +55 °C. The inverter can be stored or transported between -25 and +70 °C without damage to its electrolytic capacitors or sealing gaskets. The assembly weighs 25 kg, a value that must be considered when selecting panel supports and lifting equipment. Its water connections should remain accessible within the enclosure so that the cooling circuit can be inspected and maintained without obstructing adjacent drive electronics.
Frequently Asked Questions about PSI63C0.630-W1:
Q: What is the supported mains voltage for the PSI63C0.630-W1 inverter?
A: The PSI63C0.630-W1 inverter operates with a mains voltage range of 400 to 480 VAC.
Q: What cooling method is used in the PSI63C0.630-W1 inverter?
A: This model uses water cooling to manage heat during operation.
Q: What are the output specifications for the integrated power supply unit in the PSI63C0.630-W1?
A: The PSI63C0.630-W1 provides an integrated 24 VDC power supply unit with up to 2 A output current.
Q: What is the degree of protection for the PSI63C0.630-W1 inverter?
A: This inverter has a degree of protection rated at IP 20.
Q: What operating temperature range does the PSI63C0.630-W1 support?
A: The PSI63C0.630-W1 is designed for operation within a temperature range of +10 to +55 °C.
