PSI63C0.201-W2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat PSI63C0.201-W2 is a medium frequency inverter from the PSI Frequency Inverters series and weighs approximately 25 kg. It is water cooled and operates at a mains voltage of 480 to 690 VAC with a frequency of 50 or 60 Hz. This inverter has an integrated power supply unit that outputs 24 VDC at a maximum current of 2 A and provides IP20 protection.
Internal Product Review
The PSI63C0.201-W2 is a medium frequency inverter engineered for dependable industrial drive service, with water-cooled thermal management and IP20 protection. Operation across 480 to 690 VAC mains and 50 or 60 Hz input supports flexible integration in higher-power installations. A 24 VDC integrated power supply rated at 2 A adds practical control support, making the unit a strong choice for stable inverter performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PSI63C0.201-W2 belongs to the PSI Frequency Inverters series from Bosch Rexroth Indramat. As a medium-frequency inverter, it converts high-voltage three-phase mains power into a controllable output for induction heating generators, high-speed spindles, or other processes that require adjustable intermediate frequencies. Its integrated PROFIBUS timer allows a PLC to issue real-time setpoints, making the unit a coordinated component within automated production cells. This communication link supports synchronized process control and rapid exchanges of operating commands with higher-level automation systems.
The power section accepts line supplies from 480–690 VAC and operates at line frequencies of 50 or 60 Hz, so it can be wired directly to common plant distribution panels. Internal electronics are protected by an IP20 housing, which is intended for installation inside a clean, closed cabinet. A dedicated 24 V control rail is built into the unit. The auxiliary supply provides 24 VDC with a maximum output of 2 A, allowing contactors, sensors, or small actuators to be powered without an external source. These electrical values establish the inverter’s interface limits and provide the information needed for cable selection, fuse sizing, and cabinet ventilation. Appropriate branch protection and conductor sizing remain necessary when the inverter is connected to the plant supply.
The water-cooled design removes up to 420 W of heat loss, limiting the rise in enclosure temperature even at full modulation depth. Operation is permitted at ambient temperatures from +10 to +55 °C. Storage and transportation are permitted between -25 and +70 °C. Climatic category 3K3 under EN 60721-3-3 indicates compatibility with typical workshop conditions when the inverter is installed in a protected rack. The unit has an approximate mass of 25 kg, so its shelf, mounting points, and surrounding cabinet structure must provide adequate support. The water connections must also remain accessible for routing supply and return lines without placing strain on the fittings. Adequate clearance around the housing helps preserve access to electrical terminals and cooling connections during routine inspection and maintenance.
