PSI63C0.100-W2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911333053
The Bosch Rexroth Indramat PSI63C0.100-W2 is a medium frequency inverter in the PSI Frequency Inverters series and weighs approximately 25 kilograms. This inverter operates on a mains voltage of 480 to 690 VAC and 50 or 60 Hz, with a water-cooled design and an IP20 protection rating. It has a maximum output current of 2 amps at 24 VDC from its integrated power supply unit.
Internal Product Review
The PSI63C0.100-W2 is a Bosch Rexroth Indramat medium frequency inverter with water-cooled thermal management and a 480 to 690 VAC mains range. IP20 protection and a +10 to +55 °C operating range make this unit a well-engineered choice for controlled industrial environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PSI63C0.100-W2 is a medium-frequency inverter manufactured by Bosch Rexroth Indramat for the PSI Frequency Inverters series. The device conditions three-phase power so that tooling requiring elevated switching frequencies, such as induction heaters or high-speed weld transformers, receives tightly regulated energy. By incorporating a 24 V control rail and a programmable timer stage, it simplifies panel layouts and supports coordinated operation with drives, sensors, and motion controllers across automated production cells.
It connects to high-voltage distribution buses rated from 480 to 690 VAC, allowing the inverter bridge to operate without an upstream step-up transformer. The input accepts industrial line frequencies of 50 or 60 Hz, so installation in different geographic regions does not require hardware changes. An integrated power supply delivers a logic voltage of 24 VDC and supplies up to 2 A for external relays, contactors, or field I/O, eliminating the need for a separate switch-mode supply. At maximum load, the water-cooled assembly transfers 420 W of heat to the coolant circuit. This cooling method helps control semiconductor junction temperatures without adding airflow inside sealed cabinets.
The enclosure has an ingress protection rating of IP20, providing protection against accidental finger contact while relying on the machine cabinet for complete sealing. The permitted operating temperature ranges from +10 to +55 °C, supporting stable inverter operation in most factory climates. Storage and transportation temperatures can extend down to -25 °C without damaging the unit. Compliance with climatic category 3K3 according to EN 60721-3-3 supports installation in control rooms where condensation and dust exposure are limited. Despite its water circuit and iron-core reactors, the unit weighs 25 kg, allowing it to be installed on a suitable baseplate or another mounting surface rated for its mass. Its integrated coolant connections transfer internally generated heat away from the cabinet while maintaining the required clearances around adjacent electrical equipment.
