PSI6300.000-L1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
22 Seconds
The Bosch Rexroth Indramat PSI6300.000-L1 is a medium frequency inverter from the PSI Frequency Inverters series. It features a maximum output current of 800 Amps and operates on a mains voltage of 400 to 480 VAC. The inverter is air cooled, offers an IP20 degree of protection, and supports up to 256 programs.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PSI6300.000-L1 is a medium frequency inverter manufactured by Bosch Rexroth Indramat within the PSI Frequency Inverters series. Designed for industrial automation, the unit converts three-phase mains power into a controlled medium-frequency output so that resistive and inductive loads can be driven with accurate timing and current profiles. It is intended for applications that require repeatable energy delivery and stable process control.
The inverter is connected to a three-phase supply in the range of 400 - 480 VAC, allowing installation on factory power systems. Internally, it uses a switching clock of 1 kHz; this frequency sets the output granularity and keeps transformer size moderate. With a protection rating of IP20, the electronics must be housed in a closed cabinet, but finger-safe access to terminals is provided. When operated at maximum power, the converter dissipates 170 W to the control cabinet, so forced ventilation is recommended. Because the air used to cool the heat sink must remain at or below 45 °C, external ducting must keep the intake temperature within that limit. Air-cooled operation removes up to 360 W of heat. A time resolution of 1 ms governs the sequencer, and up to 256 stored programs permit rapid changeover of process parameters. The nominal system current is 110 A, matching mid-size welding transformers.
During high-demand intervals, the inverter can supply 800 A of primary output current, and the corresponding secondary circuit may experience peaks of 36 kA when connected to a suitably matched transformer. Line and load conductors up to 50 mm² can be clamped in the power terminals, providing the cross-section required for those currents without undue heating. The minimum squeeze time of 16 ms lets the integrated sequencer synchronize current ramps with mechanical actuators used in welding or press equipment. Continuous operation is permitted until the heat sink reaches a maximum of 55 °C; beyond this point, the control logic initiates derating to preserve semiconductor integrity.
Frequently Asked Questions about PSI6300.000-L1:
Q: What is the input mains voltage range for the PSI6300.000-L1 inverter?
A: The PSI6300.000-L1 frequency inverter operates with a mains voltage between 400 and 480 VAC.
Q: What is the maximum output current provided by the PSI6300.000-L1 frequency inverter?
A: This inverter delivers a maximum output current of 800 A for demanding industrial applications.
Q: What degree of protection does the PSI6300.000-L1 offer?
A: The PSI6300.000-L1 has an IP20 degree of protection, making it suitable for installation in protected environments.
Q: What cooling method is used for the PSI6300.000-L1 frequency inverter?
A: Air cooling is used on this model, maintaining system temperature during operation.
Q: How many programs can be stored on the PSI6300.000-L1 medium frequency inverter?
A: This device supports up to 256 programmable operations for flexible system control.
