PSI6200.100-W1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat PSI6200.100-W1 is a medium frequency inverter from the PSI Frequency Inverters series. It supports a maximum output current of 1200 Amps, operates at mains voltages of 400 to 480 VAC, and features a water-cooled design with a cooling water flow of 4 liters per minute. The inverter has a protection rating of IP20 and is rated for operation at altitudes up to 2000 meters and ambient temperatures up to 55 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PSI6200.100-W1 medium-frequency inverter is built by Bosch Rexroth Indramat as a member of the PSI Frequency Inverters series. Intended for induction heating, forging, or welding systems, it transforms line power into a controllable medium-frequency output. This output allows energy delivered to coils or transformer secondaries to be adjusted without mechanical switching equipment. Electronic power control supports repeatable heating and welding cycles in automated production cells while allowing the connected control system to regulate the process.
Operating from a three-phase input of 400–480 VAC, the inverter’s power section switches the waveform at 1 kHz and reconstructs the required medium-frequency signal. Internal electronics use a 24 V DC control supply, which also powers the 24 V timer circuit. Continuous output reaches a nominal 220 A, while transient demand can reach 1200 A at the output terminals. A water-cooled heat sink manages thermal loading with a flow rate of 4 liters per minute and an inlet temperature no higher than 30 °C. Cooling water passes through an M16 × 1.5 threaded manifold. The enclosure has an IP20 rating and can operate in rooms with ambient temperatures up to 55 °C. The power studs accommodate copper conductors with a cross-sectional area of up to 95 mm².
Total cabinet heat dissipation is 69 W while the inverter is idling and 210 W while it is operating at maximum power. The cooling loop can remove 700 W, helping internal components remain within their thermal limits during operation. Installation is permitted at elevations up to 2000 m above sea level without output derating. The water circuit tolerates pressure drops associated with the required flow rate, allowing coolant to pass through the heat sink and return to the external cooling system. The secondary side of a compatible transformer can draw up to 54 kA, supporting high-current industrial heating or welding loads. The specified supply range, coolant temperature, and ambient temperature must be maintained to support continuous operation within the inverter’s electrical and thermal limits.
Frequently Asked Questions about PSI6200.100-W1:
Q: What is the maximum output current of the PSI6200.100-W1 frequency inverter?
A: The PSI6200.100-W1 supports a maximum output current of 1200 A.
Q: What is the input voltage range for the PSI6200.100-W1 inverter?
A: This model operates with a mains voltage range of 400 to 480 VAC.
Q: How is the PSI6200.100-W1 frequency inverter cooled, and what is the required flow rate?
A: The PSI6200.100-W1 features water cooling and requires a flow rate of 4 l/min.
Q: What is the maximum allowable ambient temperature for the PSI6200.100-W1?
A: The ambient temperature should not exceed 55 °C for proper operation of this inverter.
Q: What protection rating does the PSI6200.100-W1 frequency inverter have?
A: The PSI6200.100-W1 offers an IP20 protection rating.
