Product Description

The PPC-R22.1N-T-Q1-G2-NN-FW Bosch Rexroth multi-axis motion/logic control should be installed upright with sufficient clearance below and above it. This ensures sufficient clearance for heat dissipation. The product must always be installed in the leftmost slot or slot 00 of the very first RMB rack to establish proper communication among the local Reco 02 I/O modules. This device features an allowable cable cross-section of up to 1.5mm² for incoming power. It receives its power for operation through its X1 Phoenix connector. The connector comes with two digital outputs and three digital inputs. The unit shuts down automatically if the supply voltage dips below 20VDC.

This logic and motion control must make use of a switching power supply that has an inrush current of at least 20A. The digital outputs and inputs of the X1 connector are functional only when the pins 6 and 7 have 24V voltage rating. The product supports connectivity to a 10/100 MBaud EtherNet interface at its bottom. This device encompasses two serial port interfaces. These PROG and COM interfaces have fifteen pins each. The H1 display is a four-digit alphanumeric matrix display that highlights the integrated PLC and motion diagnostic messages alternatively. The control firmware should be upgraded only by trained personnel.

This control displays the error encountered as a three-digit code preceded by the letter E and followed by the error type. The firmware and file system control data for the device are loaded on its compact flash memory card. The control supports the installation of only one fieldbus master interface and one fieldbus slave interface at a time. These interfaces can be installed in an expansion slot of the product. The unit can be interfaced with the manufacturer’s human-machine interface units to offer various functions to the user. The product can be delivered to anywhere across the globe with a warranty period of a year.