NY4042 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat NY4042 is part of the NY Linear Drives series and features four drive slots. It includes a 9-pin male Sub-D analog I/O connector, 25-pin male Sub-D digital I/O connector, and has a system power requirement of 24 V DC. The drive supports a digital output pin load of 1 Amp and uses AWG14 wiring for the motor connections.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The NY4042 linear drive module is produced by Bosch Rexroth Indramat as part of the NY Linear Drives series. Installed inside a machine’s electrical cabinet, it channels control, feedback, and safety signals between the master controller and the actuators that generate linear thrust. By housing multiple slots, dedicated power inputs, and standardized field connectors in one enclosure, the unit acts as the electrical backbone that keeps packaging, pick-and-place, and material-handling axes aligned to commanded positions and forces. This arrangement reduces external point-to-point wiring and keeps signal distribution centralized within the cabinet.
The chassis allocates 4 drive slots for amplifier or option cards and is supplied from a 24 V DC logic rail that enters through a 3-pin Phoenix MCV 1,5/3-GF3,5 terminal. Analog process values reach the module on a 9-pin male Sub-D connector, while discrete states use a 25-pin male Sub-D connector; each output can switch up to 1 A, allowing direct control of relays or annunciators. A separate 9-pin female port is reserved for fast digital I/O that demands low latency. Filter capacitors connect through a 2-pin Phoenix MCV 1,5/2-GF3,5 plug, and all logic wiring uses AWG18 conductors to help maintain voltage stability under transient load.
Position feedback is accepted on a 25-pin female Sub-D header, and the encoder leads use AWG20 cable to minimize signal attenuation over distance. Motor phases exit through an 8-pin Phoenix MSTBV 2,5/8-GF-5,08 connector and are carried on AWG14 wiring so continuous current stays within thermal limits. Safety interlocks attach to a 4-pin Phoenix MCV 1,5/4-GF3,5 interface that integrates the drive into emergency-stop chains. Separate power plugs for NY4120 and NY4140 expansions, along with a dedicated plug for NY4130 modules, keep auxiliary supplies isolated. That separation helps isolate control paths from power circuits during machine operation.
