NFD01.1-500-008 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911263131
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat NFD01.1-500-008 is a three-phase line filter from the NFD Mains Filters series. It supports a nominal voltage of 500 V phase-to-phase and operates with a rated current of 8 Amps at a mains frequency of 50 to 60 Hz. The filter has an IP10 degree of protection and functions in temperatures ranging from -25 to 85 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The NFD01.1-500-008 mains filter is produced by Bosch Rexroth Indramat within the NFD Mains Filters series. It is a three-phase line filter that sits between the plant supply and the drive cabinet to attenuate conducted interference and keep high-frequency noise from returning to the utility. By conditioning power on three-phase supplies up to 500 V, the unit helps servo drives and inverters meet electromagnetic compatibility limits in industrial automation cells such as packaging machines, printing lines, and material handling stations. This placement also helps reduce the amount of switching noise that can spread through shared power wiring inside a machine installation.
A degree of protection of IP10 indicates that only large foreign objects are blocked, so the filter must be housed in a closed panel. The nominal line-to-line voltage limit is 500 V (phase-to-phase), allowing use on common 400 V or 480 V grids without derating. It operates on utility frequencies of 50 to 60 Hz, and the windings are designed for a continuous load of 8 A. To ensure a low-impedance safety path, the installation requires a protective earth conductor of at least 10 mm², which helps limit touch voltage during fault conditions. Because of that enclosure class and grounding requirement, the filter is intended for protected cabinet mounting rather than open exposure on the machine frame.
The choke and capacitance network can endure overloads of 1.5 × rated current for 1 min/h, giving headroom during short periods of elevated demand such as acceleration or regeneration. All performance values apply at 45 °C, so continuous current must be reduced if ambient temperature rises above that point. Storage and transport are allowed between -25 to +85 °C without affecting insulation life, which supports handling before installation or during equipment downtime. Dielectric strength is verified by applying 2800 VDC for 2 s between phases and protective earth, confirming the internal insulation spacing of the filter assembly. Short-term overload tolerance and insulation strength are both important when the filter is used ahead of switching drives that generate fast electrical transients.
Frequently Asked Questions about NFD01.1-500-008:
Q: What is the IP rating of the NFD01.1-500-008 mains filter?
A: The NFD01.1-500-008 has a degree of protection rated at IP10.
Q: What type of filter is the NFD01.1-500-008?
A: This model is designed for three-phase line filtering in electrical installations.
Q: What mains frequencies does the NFD01.1-500-008 support?
A: The NFD01.1-500-008 operates at mains frequencies between 50 and 60 Hz.
Q: What is the nominal voltage rating of the NFD01.1-500-008?
A: This filter supports a nominal voltage of 500 V phase-to-phase.
Q: What is the rated current for the NFD01.1-500-008 mains filter?
A: The rated current carrying capacity for this filter is 8 A.
