Product Description

The MTC-P01.2-E2-NN-NN-NN-FW EP CNC controller from Bosch Rexroth encompasses a power fail connection. The signal from this connection is interpreted for saving the data at the time of restart when there is a power failure. The device communicates internally with an industrial PC by using a standard ISA bus. Its power supply is also routed through this bus. The unit is equipped with a rechargeable battery. This battery requires a charging time of one hour to provide close to 100 hours of backup if it is completely discharged. The controller features an enclosure model that is apt for industrial PCs.

The front view of this product depicts the H1 single-segment LED display. The electric connections of the device must be inserted or removed only after the power has been turned OFF. The NC Ready or watchdog contact at the X5 connector of the unit provides interconnection within an emergency-off chain. The state of this controller is highlighted by its diagnosis display. The error states can be diagnosed by a flashing three-digit decimal number. The firmware of this controller has to be procured as a separate sub-item. The MTC-P01.2-E2-NN-NN-NN-FW EP controller is available with a one-year warranty.

The fiber optic cables used by the product for communicating with the drives must be configured after ensuring that the transmission link does not exceed the maximum length. If multiple devices are used, they are arranged such that the diagnosis displays are adjacent to each other. The user data may get affected if the module is left unused for more than half a year. The unit can be used in combination with the manufacturer’s MTS-P01.1 SPS controller. The product encompasses a basic unit as well as an integrated axis processor. The MTC product group CNC controller can be shipped to the destination of your choice in custom military-grade foam packaging.