MST530F-0027-FT-N0CN-D303

Product Description:

MST530F-0027-FT-N0CN-D303 is a Bosch Rexroth stator assembly. The stator assembly and a rotor assembly together make up a Bosch IndraDyn T synchronous torque motor. Frame size of the stator is 530 and its frame length is F. The winding code is 0027. Bosch has designed the stator with an aluminum cooling jacket. The electrical connection for the stator is on the axial side with the larger outer diameter. The stator is delivered with two type plates for identification. These plate have peel-off foils for paint protection. Operators should attach the type plate to a visible part of the machine to help staff identify and troubleshoot any problems. A wide range of cables is available from Bosch for the synchronous torque motors. The benefit of these custom-made cables is that they are optimized for the motors and application requirements.

The Bosch synchronous torque motors must be used with a compatible drive controller that can vary its output frequency and voltage. The power cable at the stator must be protected from bends, pulls, and pushes and from continuous movements at the connection point as these types of loads can irreversibility damage the cable. The ambient temperature specified for stator use is from 0 to 40 degrees Celsius and the site elevation is from 0 to 1000 meters. The maximum allowed ambient temperature with derating is 55 degrees and the maximum allowed site elevation with derating is 3000 meters. The maximum allowed axial load due to vibrations is 10 m/s2. The maximum allowed radial load due to vibrations is 30 m/s2. Protection class of the MST530F-0027-FT-N0CN-D303 stator assembly is IP00. It must be handled by qualified staff.