MSS202F-0120-FA-N0CN-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MSS202F-0120-FA-N0CN-NNNN is part of the MSS Synchronous IndraDyn H Motors series and features water cooling with a cooling jacket diameter of 220 mm and a length of 415 mm. This motor delivers a continuous torque of 194 Nm, a maximum torque of 484 Nm, and has a rated power of 24.3 kW at 1200 rpm. It weighs 63.7 kilograms and supports a maximum current of 125 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSS202F-0120-FA-N0CN-NNNN is a water-cooled synchronous motor produced by Bosch Rexroth Indramat and supplied within the MSS Synchronous IndraDyn H Motors series. Designed for direct coupling to machine shafts, the unit converts electrical energy into precise rotational motion. It is intended for continuous-duty axes in industrial automation cells such as extruders or press drives.
With a rated mechanical output of 24.3 kW at a shaft speed of 1200 rpm, the motor delivers continuous operation in water-cooled mode. Under these conditions, it can maintain a steady torque of 194 Nm, while the cooling jacket channels water along a 415 mm long sleeve to remove heat loss. The motor accepts line-side phase currents as high as 125 A during dynamic load swings, and it draws 45.9 A when holding the rotor at zero speed. Power conductors up to 16.0 mm² can be terminated inside a connection strand whose external diameter is 22 mm. Protection is limited to IP00, so the unit must be installed inside a guarded enclosure with external splash protection. A KTY84-130 auxiliary sensor and an SNM.150.DK winding probe feed temperature data to the drive controller for thermal supervision.
The torque reserve available for short-term acceleration reaches 484 Nm, producing high breakaway force for heavy inertial loads before the current ceiling is reached. Total mass of 63.7 kg balances vibration damping with manageable handling during installation. The cylindrical water jacket measures 220 mm in outside diameter, matching standard pipe clamps for closed-loop cooling circuits. By combining the 220 mm jacket with the 415 mm length, heat removal is large enough to keep stator temperature within the limits set by the two sensors, ensuring that rated characteristics remain stable even when the motor is driven near its 125 A limit and peak torque is intermittently demanded.
