MSS182F-0200-FA-N0CN-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911310589
The Bosch Rexroth Indramat MSS182F-0200-FA-N0CN-NNNN is a stator for synchronous kit spindle motors in the MSS Synchronous IndraDyn H Motors series. It uses liquid cooling with a stator-cooling jacket and has a 1.5 meter long power cable with flying leads. The motor has insulation class F, a protection mode of IP00, and a rated speed of 2000 min-1.
Internal Product Review
The MSS182F-0200-FA-N0CN-NNNN is an IndraDyn H stator for a synchronous kit spindle motor, well suited for precise spindle applications. Liquid cooling and a stator-cooling jacket support efficient thermal management during continuous operation. A rated speed of 2000 min-1 and insulation class F make the unit a strong choice for controlled, high-duty machine designs.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSS182F-0200-FA-N0CN-NNNN is a stator element manufactured by Bosch Rexroth Indramat for the MSS Synchronous IndraDyn H Motors series. As a kit component for synchronous spindle drives, it supplies the electromagnetic field that works with a separate rotor to generate torque in high-precision machine-tool spindles and other automation axes. The product follows a standard design that allows it to be installed in compact spindle housings where forced airflow is not practical.
This stator is optimized for a rated speed of 2000 rpm, so its magnetic geometry and 0200 winding are matched to drive controllers that support this base speed. The active diameter belongs to motor frame size 182, while the magnetic stack has a frame length of F; these dimensions set the mechanical envelope that the surrounding machine structure must accommodate. Heat is removed through liquid cooling circulating inside the stator-cooling jacket, and the coolant ports are located on the axial face to simplify manifold routing. The stator has an IP00 protection rating, so its conductive parts must be enclosed by the machine frame to prevent accidental contact. Its class F insulation system supports a maximum winding temperature of 155 °C during operation.
Electrical power reaches the windings through a 1.5 m flying-lead cable that exits axially in line with the shaft, reducing bending stress in confined spaces. Coolant enters through a threaded G 1/8 port, while the return line connects through an M16×1 threaded port; these sizes support direct attachment to compatible hydraulic fittings without adapters. The permissible ambient temperature ranges from 0 to +40 °C, and the stator is supplied without a motor encoder, leaving feedback selection to the spindle system design. The winding heads use standard construction suitable for installation within the corresponding motor assembly.
