Product Description

The MSM031C-0300-NN-M5-MH0 synchronous motor manufactured by Bosch Rexroth encompasses a 0300 winding code. This product is used in combination with the IndraDrive C controllers with three-phase power connections from the same manufacturer. The device houses a plug connector for the power connection and encoder. It must be used only in NFPA-79 applications. The unit should not be installed at an elevation of over 1,000m above sea level. The motor is made of materials such as polyvinyl chloride resin, polyamide 46, anodized aluminum, aluminum pressure casting, and rubber. The product should be protected against penetration of fluid through the output shaft.

The shaft the bearings of the motor are subject to radial and axial forces during operation. The inbuilt bearings come with a 20,000 working hours lifespan in compliance with ISO 281 standards if the load limits of the product are not exceeded. The device comprises a multiturn absolute 20-bit optical encoder. It features a sound pressure level of less than 70dBA. The unit has a mass of 1.2kg. The motor is CSA Certified and UL Listed. The motor features a maximum current rating of 19.5A. The synchronous product can be dispatched to any address of your choice, worldwide.

This device has a winding inductivity of 10.6mH and a winding resistance of 3.6 Ohms at 20°C. The overall length of the unit is 30cm without considering the length of the output shaft. The memory must be buffered via a battery. The encoder does not have any incremental signal. It also has a supply voltage of 4.5V to 5.5V and maximum current consumption of 70mA. The bayonet lock must be in place when the connection cables are connected. The synchronous motor can be shipped with a one-year warranty.