Product Description

The MSK101E-0200-NN-M2-AG2-RNNN synchronous servomotor manufactured by Bosch Rexroth cannot be used without a drive controller. This motor has increased heat dissipation at the transmission. The product features circular connectors for its electrical connection. The device connection must be done with only the manufacturer’s cables. The unit can be connected only when it is de-energized. It is essential to consider utilization factors when the ideal operating temperature and setup elevation are exceeded. The motor features a 3K4 climatic category for operation for its permanent use. This product experiences vibrations in stationary mode. The device has IP 65 degrees of protection as per EN 60034-5 specifications.

The motor installation can be done in any orientation. This product supports a RAL 9005 black paint on its housing. The device has a very quiet running action because of its plain shaft. The unit encounters two types of forces on its bearings and shaft during operation. Its acting radial force must never exceed the maximum allowed limit. The motor is equipped with a 70Nm holding brake. The product can be fitted with drive elements such as pinions and couplings on the output shaft by following the manufacturer’s instructions for such fittings. This motor has a one-year backup support period.

The unit uses M58 and M23 flange sockets for its power and encoder connections respectively. Its readymade connection cables ensure fast, simple and failsafe installation as well as commissioning. The motor power, as well as encoder connectors, cannot be rotated. The product must compulsorily be de-energized before its connection is done. This device must not use damaged cables for its connection. The unit features a maximum of 100m/s² axial shock load for 11ms. This motor can be delivered to the destination through trustworthy logistics agents.