Product Description

The MSK101D-0450-NN-S2-AG0-RNNN synchronous servomotor provided by Bosch Rexroth experiences a temperature change rate of 0.5°C/min during an operation. This motor supports 200m/s² maximum allowed shock load for 11ms. The product features IP 67 degree of protection for its connector with a properly connected cable socket in accordance with EN 60034-5 specifications. The device installation in vertical orientation can be done with the flange facing either upward or downward. The unit comes with a D length code. It is necessary to do a compatibility test between the motor housing and cleansers or new lubricants before using them. The motor has an optical single-turn EnDat 2.1 encoder with 2,048 signal periods.

The product gets shut down automatically when its integrated temperature sensor detects a temperature of 150°C. The device stores the threshold motor warning and shutdown temperatures along with the type designation in its encoder memory. The unit has 75% air humidity at 30°C during transportation. It is to be stored only at room temperature in a dust-free as well as dry location free of vibration. The unit encompasses protective sleeves as well as covers that must remain intact on it during transportation as well as storage. Its drive controller monitors the functionality of the temperature sensor.

The motor bearing and encoder must be changed during commissioning after storing for above five years. The product has absolute air humidity ranging between 1g/m³ and 29g/m³ when it is in use. The device flange and shaft have to be safeguarded against damage during its handling. The unit features bolted connections for fitting the flange. These bolted connections should be capable of withstanding the forces encountered by the motor and also its weight. Its live parts must be shielded before commencing work on it. The motor has a B5 frame size as per EN 60034-7 specifications. This MSK101D-0450-NN-S2-AG0-RNNN is dispatched via well-known logistics agents with backup support for a year.