Product Description

The MSK101C-0450-NN-S1-BG0-NNNN synchronous servomotor provided by Bosch Rexroth uses M23 and M58 fixed flange sockets for its encoder and power connections respectively. This servomotor poses a risk of explosion hazard if it is handled incorrectly during its connection. The product operating temperature and installation altitude should never be more than 55°C and 3000m above sea level. This device portrays a 200m/s² maximum radial shock load for a duration of 11ms. The unit has no materials in its construction that can harm the environment during its operation. It is essential to take the product of the load factors into consideration when its favorable operating conditions are beyond the maximum specified limits.

This motor portrays a backlash-free and force-fit shaft hub connection with a quiet running action using its smooth and plain shaft. The product type should match the design of the machine to avoid exceeding the specified load limits. This device’s cooling action takes place by natural convection. The unit must have a sufficient distance of 100mm from the components on its sides for unhindered vertical convection. Its shaft sealing ring has the function of an abrasive seal. This motor has absolute air humidity between 1g/m³ and 29g/m³ during the storage as well as operation periods.

The product bearings and encoders have to be changed after storage when the age of the bearings is more than twelve months. This device will fail to run if its voltage supply is missing or the associated drive controller is at fault. The unit may vibrate when its mounting screws become loose or have a running noise if the bearing gets damaged. Its temperature sensor triggers a warning when the motor housing temperature reaches 140°C. The motor type plate highlights several details such as temperature class, housing degree of protection, torque constant at 20°C, maximum speed and more. This servomotor with its backup support for a year is sent to any global address of your choice.