Product Description

The MSK101C-0450-NN-S1-AP0-NNNN synchronous servomotor has a suitable operating temperature range of 0°C to 40°C. The Bosch Rexroth motor has a surface temperature of 155°C during and soon after operation. This product features vibrations in stationary mode. The device has a 100m/s² maximum allowed axial shock load of 11ms. This unit has IP 67 degree of protection in accordance with EN 60034-5 specifications for its connector with a properly connected cable socket. It supports installation in IM B5, IM V1 and IM V3 orientations. The motor surface characteristics get negatively affected by an additional varnish coat on the housing. This product incorporates a keyway shaft that renders form-fitting torque transmission.

The device encompasses a shaft seal greased for a lifetime under normal ambient conditions. This unit portrays the maximum permissible axial forces of 80N. It has a length code of C. The motor experiences a premature failure of its bearings because of reduced grease lifetime. This product is supposed to be fitted with only gearboxes that have a closed or oilproof lubrication system. The device installation as well as mounting must not be done in either a damaged or defective state. This unit depicts a shift in the position of the flange end of its shaft by a maximum of 0.6mm with respect to the housing because of thermal effects. This MSK101C-0450-NN-S1-AP0-NNNN servomotor features a valid warranty tag for a year.

The motor houses a fixed bearing on its B side. This product is RoHS Compliant. The device installation has to be done such that there is sufficient heat radiation. This unit comprises a KTY84-130 temperature sensor integration in the stator. Its storage is to be done in a place free from vibrations. The product has relative air humidity ranging between 5% to 95% during operation and storage. This device connection with the machine must be done considering the tightening torques. This servomotor shipment is shipped worldwide to your choice of destination.