Product Description

The MSK101C-0200-NN-S1-BG2-NNNN synchronous servomotor offered by Bosch Rexroth has a smooth and plain shaft. This servomotor might cause property damage or personnel injury because of improper handling. The product installation must be done as per the regulations specified in its documentation. This device cannot be used for direct mains operation on single-phase and three-phase networks. The unit is designed to be used only with the manufacturer’s spare parts and accessories. It is not to be installed in locations where the ambient conditions need higher explosion protection than the motor-type plate. This motor is considered to be used inappropriately if it is used for applications not released by the manufacturer.

The product must adhere to the ambient operating conditions for safe use. This device tends to cause dangerous drive controller movements because of faulty control. The unit needs to be disconnected from the power supply during cleaning or maintenance and repair work. Its cooling time is approximately five times its thermal constant. This motor handling as well as mounting are to be performed using suitable tools and lifting equipment. The product has to be relieved of its pressure before its lines are dismounted. This MSK101C-0200-NN-S1-BG2-NNNN servomotor features backup support for one year and is shipped to any address.

This device is supposed to be grounded at the appropriate grounding points before it is switched on and started up. The unit depicts a very hot housing during and soon after its operation. It features the mechanical testing of the axial run out of its flange surface to its output shaft. This motor type designation is available on the type plate and is also stored in the encoder data memory. The product transportation and storage must be done only in a horizontal orientation. This device transportation is to be done using shock absorbers if it encounters heavy vibrations during its transportation phase.