Product Description

The MSK100D-0300-NN-M2-LP2-RNNN is a digital servo motor. It is produced by Bosch Rexroth. The motor is part of the MSK product line. As per the product type code, the frame size for the motor is 100 and the frame length is D. The code for the motor winding is 0300. Performance of the motor is dependent on a number of factors that include the cooling method used, the ambient temperature and the site elevation. The MSK100D-0300-NN-M2-LP2-RNNN is a motor that operators can use with either convection cooling or surface cooling. The continuous output torque at standstill with convection cooling is 48 Nm and rises to 72 Nm with surface cooling. The continuous output current at standstill with convection cooling is 20.7 Amps and rises to 31.1 Amps with surface cooling.

Motor operation outside permitted temperature and site elevation ranges leads to performance degradation. The permitted temperature range for the MSK100D-0300-NN-M2-LP2-RNNN is 0 to 40 degrees Celsius, and the permitted site elevation range is 0 to 1000 meters. The maximum permitted ambient temperature and site elevation are 55 degrees Celsius and 3000 meters respectively. Bosch has installed an optical multiturn encoder on the motor. This encoder comes with an EnDat 2.1 interface and is rated for 2048 signal periods. Operators can order MSK motors with the electrical connector at one of four locations. The MSK100D-0300-NN-M2-LP2-RNNN has the electrical connector on the left side of the housing. The main motor shaft includes a keyway and features a shaft seal. Bosch has also provided an optional holding brake rated for 70 Nm on the servo motor. The housing of the MSK100D-0300-NN-M2-LP2-RNNN motor is designed for increased concentricity and reduced run out. Protection class of the servo motor is IP65.