Product Description

The MSK100D-0200-NN-M1-AG2-NNNN is a sophisticated synchronous motor designed by Rexroth Indramat to convert electrical energy into kinetic energy required by industrial production systems for operation. This motor features a compact design and a very durable enclosure; thus, it can be operated in harsh industrial environments such as potentially explosive areas. The rotational movements of this industrial motor are highly accurate; this is majorly due to the sophisticated multiturn absolution optical encoder, which provides the drive controller with information about the operation of the motor in real-time; thus, the drive controller can immediately correct any deviation of the motor from the pre-determined operational pre-determined operational parameters.

The MSK100D-0200-NN-M1-AG2-NNNN industrial motor is a cost-effective device that can operate with an efficiency as high as 95 percent without experiencing any major mechanical failure; the high durability of this motor means industrial operators do not need to spend money on motor repairs repeatedly. Integrated at the output shaft of this synchronous motor are special grease-lubricated ball bearings designed to reduce the frictional heat generated at the motor’s shaft; these bearings have a serving life of about 30000 hours; however, this can significantly reduce if the motor is overloaded. The MSK100D-0200-NN-M1-AG2-NNNN synchronous motor also contains an electrically releasing holding brake with a holding torque of about 70 newton-meters; this brake helps to retain the load connected to the motor’s output shaft when the motor is at a standstill.

The MSK100D-0200-NN-M1-AG2-NNNN synchronous motor is integrated with a three-phase electrical connector through which it receives electrical current from the drive controller. At a maximum input current of about 58.5 Amperes, this motor rotates at a maximum speed of 2000 revolutions per minute.