Product Description

The MSK100C-0450-NN-M2-LG0-RNNN synchronous servomotor offered by Bosch Rexroth must be shut down only after the main switch of the machine featuring its installation is done has been switched OFF. This motor requires up to 140 minutes of cooling time. The product can have undesirable consequences because of insufficient heat dissipation. This device fails to run if its voltage supply signal or controller enable signal or both are missing. The unit features components made of different materials such as steel, brass, aluminum and copper. Its storage must be carried out at a temperature ranging from -20°C to 60°C as per EN 60721-3-1 specifications.

The product must comprise no salt mist on its surface at any point in time. This device is integrated with a KTY84 type temperature sensor to monitor its temperature. The unit realizes heat dissipation by natural radiation to the ambient air. Its encoder memory stores the threshold values of the motor warning temperature and motor shutdown temperature. The motor is RoHS Compliant and EAC Certified. The product experiences a shift of the flange end of its output shaft with respect to the motor housing by up to 0.6mm because of thermal effects. This MSK100C-0450-NN-M2-LG0-RNNN servomotor is equipped with backup support for one year.

This device might encounter premature bearing failure due to mechanical damage or increased wear. The unit supports up to 80N axial force. Its acting radial force must never exceed the maximum allowable radial force limit. The motor comes with a radial shaft sealing ring on its output shaft. The product houses a plain shaft that renders a very quiet running action. The device is associated with a black RAL 9005 coating on its housing. The unit can be damaged due to the penetration of liquids. It fulfills Class 2M1 transport demands in accordance with EN 60721-3-2 specifications. This servomotor is deliverable to any address across the globe.