Product Description

The MSK100C-0301-NN-M1-LG0-NSNN is an advanced servo motor. It is part of the MSK series from Bosch Rexroth. Only trained professionals should handle Bosch products. Structural modifications to the motor are not allowed. Bosch will not accept responsibility for any damage or injury caused by unintended use of its products. Any motor that is damaged should not be installed or put into operation. MSK motors are available with different housing designs. The housing of the MSK100C-0301-NN-M1-LG0-NSNN motor is designed for increased concentricity and run out. MSK motors include an optional holding brake. However the brake is not available on the MSK100C-0301-NN-M1-LG0-NSNN motor. Customers can order the optional holding brake if required. The MSK100C-0301-NN-M1-LG0-NSNN motor has a smooth shaft and a sealing ring that protects the motor bearings. Protection class of the motor is IP65.

The MSK100C-0301-NN-M1-LG0-NSNN comes with an integrated multiturn encoder. The encoder provides absolute feedback and supports the Hiperface protocol. A servo controller connected to the motor provides electrical power. The power cable carrying the power connects to a power socket on the left side of the motor. Depending upon operational requirements, either natural convection or surface cooling can be used to cool the motor. Surface cooling relies on a cooling fan for increased airflow and leads to improved heat dissipation. As a result, the motor delivers higher torque and current output with surface cooling. The rated maximum speed for the MSK100C-0301-NN-M1-LG0-NSNN is 4500 RPM. The weight of the motor is 45.1 kilograms. The ambient temperature for normal operation is 0 to 40 degrees Celsius. According to EN 60034-1, the thermal class of the motor is 155. Sound pressure produced by the motor does not exceed 75 dB.