Product Description

The MSK100C-0200-NN-S2-AG2-RNNN Bosch Rexroth synchronous servomotor has a defective or wrong temperature display if its temperature sensor is defective or not connected. The motor storage must be done properly after disconnecting it from the machine. The product is integrated with an electrically releasing holding brake. The device is intended to be retained in its original state. The unit must be utilized only for applications intended by the manufacturer. Its installation has to be done as per the EMC requirements. The motor is likely to depict faulty control because of malfunctioning encoders and sensors. The product handling has to be done with suitable tools and equipment correctly.

This device houses a single-turn EnDat 2.1 optical encoder. The unit supports a permissible ambient operating temperature range of 0°C to 40°C. It is important to detect and eliminate a fault causing a voltage deviation as soon as possible. The motor may have an increased temperature when a fault occurs. The product is not approved for use where explosive atmosphere or materials can occur for a long time or permanently. The device might encounter deterioration of its gaskets because of unavoidable temperature fluctuations. This synchronous motor comes with a year’s backup support from Wake Industrial.

The motor has IP 65 protection rating only if its cap nuts are fully tightened. The product encompasses a standard design. The device is fitted with a plain shaft that renders very quiet running. This unit houses a radial sealing ring that is resistant to chemicals and oils on the shaft. Its shaft sealing point must neither be soiled nor run in a dry state. The motor withstands a maximum radial force based on its force action point and shaft breaking load. This motor is dispatched globally to any country in the world based on your choice of destination.