Product Description

The MSK100C-0200-NN-S1-RP2-NNNN synchronous servomotor by Bosch Rexroth has 100 size code. This motor is integrated with an output shaft as well as an optical encoder system. The product can cause property damage, personnel injury or both due to improper handling. The device is suitable for use in areas where an explosive atmosphere occurs occasionally whenever a fault occurs. The unit cannot be used directly on a single-phase or a three-phase network. It might be required to use additional actuators and sensors for controlling and monitoring the motor. The motor assembly, mounting and installation are to be done as per the instructions in the documentation.

The servomotor is not to be intended when there are extreme temperature fluctuations. The product can be connected and used with the manufacturer’s cables and spare parts. The device must be switched ON only after ensuring the fixed connection of its protective conductor as per the interconnection diagram. The unit should be cooled for at least 140 minutes after use before any work is done on it. Its faulty control can cause dangerous drive controller movements. The motor is to be worked on only after wearing safety gloves when touching its hot surface.

The product is cooled by natural convection. The device portrays ignition sparks if the associated connectors are either disconnected or connected under load. This unit must encompass a fixed grounded conductor prior to its commissioning. Its holding brake helps in performing an internal check on the drive. The motor has a C frame length. This product storage, as well as transportation, has to be done only in horizontal orientation. The device mounting has to be executed only on a clean and dry surface. The unit is designed such that it is to be worked on only by skilled electricians. This servomotor with a one-year warranty is sent through noteworthy logistics teams to any worldwide address.