Product Description

The MSK100B-0450-NN-S2-BG0-RNNN synchronous servomotor manufactured by Bosch Rexroth has increased concentricity quality. This motor has no holding brake. The product features the danger of explosion due to incorrect fitting of gearboxes for transmission. This device encounters radial and axial forces during operation. The unit has reduced torque by 20% to 30% when transmissions are attached. The unit uses circular connectors for power and encoder connection. It features simple and fast installation when the manufacturer’s readymade cables are used for the connection.

The motor has its power connector directed to its B side. This product features a terminal on its flange to connect the equipotential bonding. The device supports an ambient installation elevation of 1000m over sea level. This unit features a 3K4 climatic category during operation as per DIN EN 60721-3-3 specifications. It features 10m/s² axial load. The motor experiences vibrations in the form of sinewave oscillations during stationary operation. This product portrays IP 67 protection class for its connector with the cable socket connected properly. The device installation is possible in any orientation. This unit depicts a RAL 9005 black prime coat on its housing. This servomotor comes with one-year backup support.

The motor houses a plain and smooth shaft with a very quiet running action. It has a radial shaft sealing ring on the output shaft. This product comprises bearings with a lifespan of over 30,000 operating hours as per ISO 281 specifications. The device features a frame length of B. This unit supports axial forces without restriction up to the limit specifications of the manufacturer. Its acting radial force should never be more than the maximum allowed limit. The motor has an unacceptably high load on its bearing and shaft when extremely rigid couplings are mounted. This product must make use of self-supported drive elements on its shaft whenever possible. This servomotor dispatch can be done globally.