Product Description

The Bosch Rexroth MSK100B-0450-NN-M2-BP0-RNNN is an industrial synchronous servo motor. It is a synchronous motor because its speed and the input current frequency are synchronized. It is a servo motor because it supports feedback and, along with a controller, forms part of a closed-loop control system. An optical multiturn encoder installed on the MSK100B-0450-NN-M2-BP0-RNNN measures speed and other parameters such as torque. The motor transmits these measurements, known as feedback, to the controller. The controller adjusts its output based on feedback from the motor. The encoder on the MSK100B-0450-NN-M2-BP0-RNNN motor has an EnDat 2.1 interface and supports 2048 signal periods. The controller supplies motor power through a power cable. This power cable connects to a power socket on the motor. Operators need to specify the location on the power socket at the time of ordering.

The power socket on the MSK100B-0450-NN-M2-BP0-RNNN motor is on side B. Bosch offers plain shafts and shafts with a keyway for MSK motors. The main output shaft on the MSK100B-0450-NN-M2-BP0-RNNN motor includes a keyway. The keyway helps prevent relative rotation and therefore ensures effective torque transfer. The motor output shaft is fitted with a seal that protects motors bearing from dust and moisture. MSK motors support an optional holding brake that operators must specify at the time of ordering. The MSK100B-0450-NN-M2-BP0-RNNN does not include a holding brake. Housing of the MSK100B-0450-NN-M2-BP0-RNNN motor is specially designed for increased concentricity and run-out. Protection category of the motor is IP65. The MSK100B-0450-NN-M2-BP0-RNNN motor dissipates heat via natural convection. Bosch provides optional cooling fans for MSK motors that allow use of surface cooling. The specified ambient temperature is 0 to 40 degrees Celsius.