Product Description

The MSK100B-0450-NN-M1-BG1-NNNN is a Bosch servo motor. It is a synchronous motor: its speed is synchronized to the input current frequency. A drive controller supplies motor current, and therefore controls motor speed and other parameters including torque and position. Maximum rated speed of the servo motor is 4500 RPM. The maximum sound produced during normal operation is always less than 75 dB. Approximate weight of the servo motor is 36.5 kilograms. This includes the weight of the optional holding brake. Voltage rating of the brake is 24 Volts DC and its current draw is 0.93 Amps. The maximum brake connection time is 15 milliseconds and the maximum disconnection time is 115 milliseconds. An optimal multiturn encoder on the MSK100B-0450-NN-M1-BG1-NNNN motor enables motor feedback. The encoder supports Hiperface and is rated for 128 signal periods.

The feedback cable connecting the controller and the motor terminates on a sealed feedback connectors. The power cable connecting the controller and the motor terminates on a sealed power connector. The motor features a smooth shaft with a sealing ring. In addition, the motor housing is also sealed. As a result, the motor belongs to the IP65 protection category: it is dustproof and safe from low-pressure fluid jets. Ambient specifications for motor operation include 0 to 1000 meters elevation and 0 to 40 degrees Celsius temperature. Motor operation outside these specified limits leads to output derating. Extreme deviation from specified ambient conditions can lead to motor malfunction and failure. The MSK100B-0450-NN-M1-BG1-NNNN motor is designed for convection cooling. Installation of an optional cooling fan allows motor operation with surface cooling. To minimize installation errors and ensure reliable operation, only trained personnel should install and operator the motor.