Product Description

The MSK100B-0450-NN-M1-AP0-NNNN synchronous servomotor provided by Bosch Rexroth tends to vibrate when its mounting screws have become loose. This motor needs a bearing replacement if there are running noises or the bearing has reached its service life. The product can get damaged without repair due to excessive dust and dirt. This device has to be stored in a place away from direct sunlight. The unit maintenance must never be executed when the machine is running. Its live parts can be touched only after checking if their voltages are below 50V. The motor installation is recommended to be done in industrial or commercial machinery.

This product might encounter an over-temperature switch-off even when it operates with the rated data if there is no cooling implementation. The device has limited life when operated under unfavorable conditions. This unit shutdown should be done after switching OFF the main switch of its machine. Its commissioning is allowed only after making sure that it is not damaged and all the connections are in place. The motor has protection against vibration and water if its cap nuts are fully tightened. This product may cause potential damage if its connectors are handled in an energized state.

The device flange holder must be free of burrs during the mounting process. This unit incorporates bolted connections that can absorb its weight force for mounting the flange. Its power connector has to be placed in the correct position on the thread of its terminal box. The motor installation, maintenance and operation are to be done by personnel who have the required training to switch electrical circuits OFF and ON. This product lifting must be accomplished using cranes with loop lifting straps. The device requires shock absorber fitting if heavy vibrations can occur during transport. This motor features backup support for a year and is sent to any destination across the globe.