Product Description

The MSK100B-0450-NN-M1-AG2-NNNN synchronous servomotor features a multiturn absolute Hiperface optical encoder. The Bosch Rexroth motor fails to run as intended if either the voltage supply or controller enable signal or both are missing. This product is supposed to be secured against falling before the disconnection of its mechanical connections. The device depicts combustion via the hot surface when it has a temperature higher than 60°C. This unit storage must be properly done after it has been dismounted. It incorporates magnetic materials in its construction. The motor installation plus operation must not take place if it is not working properly.

This product installation should comply with the specified regulations in its documentation. The device is connected to a programmed drive controller to execute the application-related functions. This unit operation is restricted to only applications highlighted by the manufacturer. It can be switched ON only after establishing the fixed protective conductor connection. The motor must be free of liquid accumulation around the shaft with vertical installation. This product has derated performance when it is used outside the operating limits. The device housing needs to be protected against corrosion due to salt mist. The unit operation is never allowed in case of typical error states.

The motor encoder has 4,096 distinguishable revolutions. Its holding brake can be activated when the motor is turning only if there is a fault. This product has a 15ms maximum connection time for the holding brake. The device is designed and manufactured in compliance with EU directives. This unit needs cleaning to be done if it has obstructed heat dissipation. It is important to wear gloves when handling its surface to avoid getting burnt. This MSK100B-0450-NN-M1-AG2-NNNN motor shipment is done through well-known freight partners like USPS and UPS along with a warranty for a year.