Product Description

The MSK100B-0400-NN-S2-BG1-RNNN Bosch Rexroth synchronous servomotor is never supposed to be used with a drive controller from any other manufacturer. This motor might experience unavoidable temperature fluctuation when it is being used. The product depicts a size code of 100. This device is CSA Certified and UL Listed. The unit is equipped with a radial shaft sealing ring on the output shaft. It supports S1 and S3 operating modes. The motor axis has to be moved to the home position after the initial powering up or a power failure. This product is associated with a B5 frame size in accordance with EN600334-7 specifications. Its holding brake has a voltage rating of 24VDC and a current rating of 0.93A.

The device features a DS M10 centering hole on its shaft in adherence with DIN 332, Part 2 specifications. This unit is cooled by natural convection. Its drive controller uses the current motor position to control the speed of the motor. The motor-holding brake cannot be used as a service brake for personal protection. This product allows the fitting of only those gearboxes that correspond to Ex-protection demands as per EG 94/9 directives. The device utilizes circular connectors for its electrical connection. This unit is available with a year’s Wake Industrial warranty.

The motor features fast, simple and fail-safe installation if the manufacturer’s readymade connection cables are used. This product connection has to be done only in the de-energized state. The device installation is allowed at a maximum elevation of 3000m over sea level. This unit features the Class 3K4 climatic category during operation. It features vibrations in form of sine-wave oscillations in stationary mode. The motor has IP 65 protection class for its output shaft as well as housing. This product is not to be coated with an additional varnish on its housing. This MSK100B-0400-NN-S2-BG1-RNNN motor dispatch is done all over the world.