Product Description

The Bosch Rexroth MSK100B-0400-NN-M1-AP1-NSNN synchronous servomotor has an Ex-design as well as increased run-out and concentricity as per DIN 42955 specifications. This motor has 5% low relative air humidity. The product also has 28Nm continuous torque at 60K in standstill mode. The device encompasses an optical encoder system. This unit can cause property damage if it is not deployed as intended. Its S3 operation mode is depicted along with the duty cycle. It is associated with a blind plug flushing connection. The motor supports use in Zone 2 and Zone 22 atmospheres. This product supports using of only the manufacturer’s cables and accessories.

The device comprises  KTY84 temperature sensor integration in its stator. This sensor triggers a warning when the motor temperature reaches 140°C. The motor poses a risk of injury due to shearing, cutting and hitting. The product houses an additional grounding connection with a 4mm² cross-section. This device permits flushing via screwed connections using a passive or inert gas. The unit encounters a discharge current over its conducting housing parts if the grounding conductor is not connected. Its drive controller must implement a safe starting lockout to prevent unintended startup. The motor features a 102A maximum current rating.

The product comprises a cooling time that is approximately five times its thermal time constant. The device supports upright installation with the output shaft facing either upward or downward. The unit is to never have an accumulation of fluid around the shaft. Its holding brake has a 24V +/-10% voltage rating. The motor features an X marking on its type plate indicating the explosion protection classification. This product is connected with a multi-turn absolute Hiper-face interface. The device operation is monitored and controlled by the connected drive controller. The unit must never operate beyond 55°C. This motor is available for global shipping with a year’s backup support from Wake Industrial.