Product Description

The Bosch MSK100B-0300-NN-S2-AG0-RNNN is a synchronous servo motor. It is part of the MSK product line. As per the product type code, the motor frame size is 100, the frame length is B and the winding code is 0300. Length of the MSK100B-0300-NN-S2-AG0-RNNN motor is 378 millimeters. Its centering diameter is 130 millimeters. The servo motor has a smooth shaft with 32 millimeters diameter. Approximately 60 millimeters of the shaft is available outside the motor housing. Four mounting holes on the flange allow secure motor mounting. The diameter of each mounting hole is 15 millimeters. Four M10 screws are required for motor mounting. The size of the motor flange is 165 millimeters. The MSK100B-0300-NN-S2-AG0-RNNN motor is suited to natural convection and surface cooling. The torque output is 28 Nm with natural convection and 42 Nm with surface cooling.

The current output of the MSK100B-0300-NN-S2-AG0-RNNN is 17.4 Amps with natural convection and 26.1 Amps with surface cooling. Weight of the servo motor is 34 kilograms. It is provided with a sealed housing that has IP65 protection rating. This rating allows motor use in adverse operating environments. The motor hosing is designed with increased concentricity and run out. The motor housing is painted black. Six encoders are available for the MSK motor series. The MSK100B-0300-NN-S2-AG0-RNNN motor is equipped with a singleturn optical encoder that has an EnDat 2.1 interface and is rated for 2048 signal periods. Two types of output shafts are available for MSK motors. The MSK100B-0300-NN-S2-AG0-RNNN motor is equipped with a smooth shaft that has a sealing ring. The shaft seal protects motor bearings. However, it does degrade during operation, and therefore requires periodic inspection and replacement. The electrical connection is on side A.