Product Description

The MSK100B-0200-NN-S3-AG0-NNNN synchronous servomotor offered by Bosch Rexroth can take up to 140 minutes of cooling time after it has been turned OFF. The servomotor and its supply lines need to be secured against falling before the mechanical connections are disconnected. The product is made of materials such as aluminum, steel, brass and copper. The device depicts a standard design. The unit is a good choice for implementation in general automation technology-related applications. It is important to use gloves when working on the hot surface of the motor. The three-phase product features a plain and smooth output shaft without a keyway and an optical encoder system.                                                                                                                                

The device should be utilized only as intended and for applications supported by its manufacturer. The unit is meant to be retained in its original state without any hardware modification. It should be operated with only the manufacturer’s drive controller. The motor operation must never take place without establishing a proper grounding connection. The product may cause dangerous drive controller movements due to defective components or operator errors. This device transportation is intended to be done with suitable equipment. The unit must incorporate mechanical fastening of its cable ends. Its components feature explosion protection requirements as per 2014/34/EU directives.

This motor features a maximum temperature of 155°C on its housing when it is used within the ideal operating temperature range. The product housing is likely to get corroded because of contact with aggressive materials such as salt mists, coolants, cutting oils or lubricants. The device has to undergo an acceptance test before the first startup of the system. The unit houses an encoder with a Hiperface interface and supports indirect and absolute position recording within a single mechanical rotation. This MSK100B-0200-NN-S3-AG0-NNNN servomotor has backup support for one year and is delivered through reputed freight carriers to its destination.