Product Description

The MSK100B-0200-NN-S2-BG0-RSNN synchronous servomotor provided by Bosch Rexroth can be commissioned only after ensuring that the electrical and mechanical connections are intact. This motor houses an inbuilt encoder with a maximum current consumption of 150mA and a power supply voltage of 3.6Vcc to 14Vcc. The product portrays an Ex-design as per DIN 60079 specifications. The device comes with Class F thermal class. The unit is supported by a plain output shaft. Its power connector is directed towards side B in this motor. The motor has a Level A vibration severity grade in adherence to EN 60034 specifications. This product has a 378mm overall length.

The device frame size is proportional to its power rating. The unit has less heat transmission through its flange with attached transmissions. Its encoder allows the indirect position and absolute recording within a single mechanical rotation. The motor incorporates circular connectors and readymade connection cables for its connection. This product has pins-type contact for its plug connectors. This device operation should take place in areas where no explosion takes place during normal use. The unit features overload protection because of the temperature monitoring sensor.

The product uses tensioning elements or coupling sleeves to fix the machine elements that are to be driven onto its plain shaft. It must be ascertained that the sealing point of the shaft sealing ring is neither soiled nor subject to dry running. The motor shaft and shaft seal should not have direct contact with the related machining medium because of the system or machine design. The device has less than the standard lifespan for the bearings because of mechanical damage or increased wear. It is important to check that there is no fluid around the output shaft as motor damage is possible because of liquids penetration. This servomotor with backup support valid for one year is delivered through any address irrespective of the country you live in.