MSK075E-0450-NN-M2-UG0-RNNN

  • Rated 4.6 (5 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911332098
    In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The MSK075E-0450-NN-M2-UG0-RNNN is manufactured by Rexroth Indramat Bosch as part of the MSK Servo Motor Series. It features a continuous torque of 23.0 Nm and a continuous current of 15.6 A. It also displays a maximum torque of 88.0 Nmand a maximum current of 63.9 A and a winding inductive of 4,460 mH
✓ In-Stock!

Wake Industrial LLC is not an authorized distributor of this product.

MSK075E-0450-NN-M2-UG0-RNNN

  • Rated 4.6 (5 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911332098
    In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The MSK075E-0450-NN-M2-UG0-RNNN is manufactured by Rexroth Indramat Bosch as part of the MSK Servo Motor Series. It features a continuous torque of 23.0 Nm and a continuous current of 15.6 A. It also displays a maximum torque of 88.0 Nmand a maximum current of 63.9 A and a winding inductive of 4,460 mH
Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

The Bosch Rexroth MSK075E-0450-NN-M2-UG0-RNNN synchronous servomotor comprises no holding brake to support the operation. This servomotor portrays increased concentricity quality. The product has a maximum of 95% high relative air humidity during storage and use. This device encounters vibrations during stimulation on its flange. The unit has an IP 65 protection type according to EN 60034-5 specifications for its output shaft and housing. It must not have fluid accumulation at the output shaft. This motor depicts a backlash-free and force-fit style shaft-hub connection with very quiet running. The product incorporates a shaft seal that has lifetime grease under standard ambient conditions. This device needs to be coordinated with the machine design and the drive elements mounted on the shaft to avoid exceeding the load limits.

The motor installation is recommended to be done at 1000m above sea level. This unit cannot encounter a radial force higher than the maximum allowed limit. It is possible to install only those gearboxes that have a closed oilproof lubrication system. The product features an unacceptably high load on the bearings and shaft when extremely rigid couplings are mounted. This device must preferably incorporate only self-supported drive elements on the shaft that are connected by means of axially compensated couplings. The unit is cURus Recognized. This servomotor is associated with backup support for a year from Wake Industrial.

The motor portrays heat dissipation by means of natural radiation to the ambient air. Its surface characteristics tend to get influenced negatively because of an additional housing varnish when it is used in hazardous areas. This product uses two independent operating systems to monitor its temperature. The device has a high dielectric load for its integrated isolation system. This unit portrays Class 2K2 climatic ambient conditions during transport in compliance with EN 60721-3-2 specifications. It can never have salt mist on its surface. This servomotor dispatch can be done to any desired address of your choice.

  • MSK075E0450NNM2UG0RNNN
  • MSK075E 0450 NN M2 UG0 RNNN
  • MSK-075E-0450-NN-M2-UG0-RNNN
  • MSK75E-0450-NN-M2-UG0-RNNN

MSK075E-0450-NN-M2-UG0-RNNN Technical Specifications

Continuous Current at Standstill 100 K: 15.6 A
Continuous Torque at Standstill 100 K: 23.0 Nm
Maximum Current: 63.9 A
Maximum Torque: 88.0 Nm
Winding Inductivity: 4,460 mH
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo