Product Description

The MSK075E-0450-NN-M1-UP2-NNNN synchronous servomotor produced by Bosch Rexroth is meant to be lifted by using cranes with loop lifting straps. This servomotor has to be de-energized before commencing any work on it. The product uses bolted connections for mounting the flange. This device has to be prevented from jamming or clamping the centering collar on the motor side. The unit fails to run if the controller-enabled signal is missing or the controller is faulty. It has a cooling time of up to 140 minutes. This motor needs to be dismounted from the machine before any work is done on it.

The product does not have any hazardous substances that can be released during its use. This device comes along with an optical encoder system, a holding brake and an output shaft without a keyway. The unit supports use in explosive atmospheres as per ATEX 94/9/EC directives. It can cause damage if it is not used as intended. The motor operates only with the manufacturer’s drive controller which functions like a converter. This product operation is permitted only in the explicitly mentioned combinations and configurations of its components. The device cannot be used if the ideal operating conditions at the installation site need higher explosion protection requirements than specified in the type plate.

This motor has a maximum temperature of 155°C on the housing. The product is supposed to be commissioned only after ensuring that the position of its grounded conductor is fixed. This device has a discharge current over its conducting housing parts if its grounding connector in the associated motor cable has no connection. The unit offers no assurance of personnel safety with its electrically-released 70Nm holding brake. Its encoder comprises a multiturn absolute Hiperface interface with 128 signal periods. This MSK075E-0450-NN-M1-UP2-NNNN servomotor with its one-year backup support is dispatched worldwide.