Product Description

The MSK075D-0300-NN-S2-UP0-RNNN is a compact and high-precision servomotor manufactured by Rexroth Indramat as a part of its Indradyn S product group. The frame size and frame length categorization of this model is 075 and D respectively. Similarly, its windings designation is 300, and its temperature control mechanism is facilitated by natural convection. For accurate temperature monitoring, the MSK075D-0300-NN-S2-UP0-RNNN comes with a KTY8-type sensor. To improve heat dissipation and maintain the efficiency of the embedded sensor and the entire cooling system, the motor must always be tidy.

At an output rotational speed of zero, the stall torque produced by the MSK075D-0300-NN-S2-UP0-RNNN is 17.0 Nm. Also, during normal operation, it produces a maximum torque of 66.0 Nm. For optimal output, the permissible ambient temperature during use must be within the range of 0 to 40 degrees C. Similarly, the recommended setup elevation for the best performance is between 0-1000 meters. The MSK075D-0300-NN-S2-UP0-RNNN’s maximum permitted axial shock load is 10m/s² and it has a radial shock load of 300 m/s².

Due to its characteristic compact build, it features a lightweight design, which results in an easy installation. The design of this motor equips it with a B05-type flange assembly. In terms of storage, the environmental factors required for the MSK075D-0300-NN-S2-UP0-RNNN servomotor are - an air temperature range of -20 to 60 degrees C, relative air humidity of 5 to 95%, absolute air humidity of 1 to 29 g/m³, low vibration, dust-free and moisture-free. To ensure the safety of personnel while also protecting the equipment, the installation of this motor may only be done after it has been de-energized and disconnected from an electrical source.