Product Description

The MSK071E-0450-FN-S1-UG0-NNNN industrial motor is a unique industrial machine designed by Rexroth Indramat to generate kinetic energy for machines used in production and processing operations. This industrial motor is designed according to international standards, its housing contains a high metal content that protects it from external interference, and this housing is also protected from corrosion and rapid deterioration by a special black coating. The handling of the MSK071E-0450-FN-S1-UG0-NNNN industrial motor is designed to be safe and easy, however, this is only guaranteed when the motor is operated in ideal conditions as stated in the documentation supplied with it. This industrial motor also contains special grease lubricated ball bearings that reduce the frictional heat generated at the output shaft of this industrial motor. The ball bearings present in this motor have a service life of about 30,000 hours, however, this can be significantly reduced if the motor is used with industrial applications that involve the handling of heavy loads.

The MSK071E-0450-FN-S1-UG0-NNNN industrial motor contains a single-turn electrical encoder that converts the physical operation of the motor into digital signals that the device controller can interpret and use to control the general operation of the motor in real-time. The communication between this motor and the drive controller occur through two major types of electronic cables; the power cable and the motor feedback cable.

The MSK071E-0450-FN-S1-UG0-NNNN industrial motor is designed to be operated at an ambient temperature range that falls between 0 to about 40 degrees Celsius, however, if the motor is not in operation, it can be stored at an ambient temperature as high as 80 degree Celsius. Also, the maximum installation height for this industrial motor is about 1000 meters above sea level.