Product Description

The MSK071E-0450-FN-M1-UG0-NNNN synchronous servomotor produced by Bosch Rexroth incorporates a standard design. The motor can withstand up to 60N axial force. The product can operate at a maximum of 3,000m elevation above sea level with reduced performance. The device encounters vibrations in sinewave oscillations format in stationary use. The unit fulfills Class 2M1 demands on transport conditions. It portrays IP 67 protection class for its connector with a properly connected cable socket. The motor installation in the vertical position can be done with the shaft facing either upward or downward. This product is not meant to be operated in conjunction with a drive controller from other manufacturers.

The device housing features a black RAL 9005 varnish on the housing. The unit portrays a plain shaft with an extremely quiet running action. Its shaft can be coupled with the machine elements that have to be driven by using tensioning elements or coupling sleeves. The motor features IP 65 protection class on its flange side. The product encounters a radial force based on its average speed, the service life of its bearings and force action point.  This device supports the fitting of only gearboxes with closed or oilproof lubrication systems. Its shaft sealing ring functions like an abrasive seal. The unit has a 0.6mm deviation of the flange end of the shaft with respect to its housing because of thermal effects.

The motor might encounter damage to its fixed bearing if the maximum allowed axial force is exceeded. The product has lowered heat dissipation if its surface is contaminated. This device comprises a temperature monitoring sensor that triggers a warning when its temperature reaches 140°C. The unit must not have a voltage rise that is more than the specified limits of the impulse voltage in accordance with DIN VDE 0530-25 specifications. This motor is sent globally with an offer for one-year backup support.