Product Description

The MSK071D-0450-NN-M2-UP1-RNNN synchronous servomotor from Bosch Rexroth is suitable for use in potentially explosive areas. This motor is intended to be used only with the manufacturer’s drive controller. The product has an optical encoder, a keyway shaft and a holding brake. The device belongs to the MSK product group of such offerings. The unit does not support direct mains operation on a single-phase or a three-phase network. It has to be properly grounded by a motor cable before startup and use. The motor operation is controlled and monitored by the associated drive controller. This product must never be operated underwater.

The device is subject to radial as well as axial forces during operation. The unit portrays a very hot housing during and soon after operation. It has to be neither disassembled nor opened in a pressurized state. The motor must be disconnected from electric power for maintenance, cleaning or repair work. The product can function at a maximum temperature of 55°C. This device should be serviced and repaired only by the manufacturer’s authorized personnel. The unit must never have corrosion on its surface. Its holding brake is to be used only in standstill mode. This MSK071D-0450-NN-M2-UP1-RNNN synchronous motor has a one-year warranty.

The product may have a high temperature when it is overloaded resulting in explosion hazards. The device does not have leakproof housing because of deterioration of gaskets or unavoidable temperature fluctuations. The unit is UL Listed and CSA Certified. It can be installed in any orientation. The motor incorporates a multiturn absolute encoder that supports indirect position recording. This product has four pole pairs. The device is characterized by a B05 frame size designed as per EN60034-7 specifications. The unit is associated with a 10x8x45 key for its output shaft. This motor can be sent to any destination of your choice across the globe.