Product Description

The Bosch MSK071D-0450-FN-M2-UG2-RNNN is a servo motor. It belongs to the category of synchronous motors. The speed of synchronous motor is synchronized to the frequency of input current. A drive controller provides the input current of the motor. The output frequency of the drive controller is varied to control motor speed. The controller also controls the motor torque and position. The MSK071D-0450-FN-M2-UG2-RNNN is part of the MSK product line. It is designed for liquid cooling. Other motors from the MSK series also support cooling methods such as natural convection or surface cooling. The ambient temperature during motor operation should be between 0 and 40 degrees Celsius. The heat loss to be dissipated is 0.9 kilowatts. The inlet temperature for the coolant is 10 to 40 degrees Celsius. The required coolant flow rate is 1.3 liters per minute.

Volume of the coolant duct on the MSK071D-0450-FN-M2-UG2-RNNN motor is 0.05 liters. Features provided on the motor include an integrated optical encoder, rotatable power and feedback connectors, a plain shaft with seal and a 30 Nm rated electrically-releasing holding brake. The seal on the shaft protects the motor bearings. It also provides protection against dust and moisture ingress. The housing of the MSK071D-0450-FN-M2-UG2-RNNN is IP65 rated. The connectors can be rotated 240 degrees in either direction. The motor encoder is a multiturn encoder with EnDat 2.1 interface that is rated for 2048 signal periods. Housing of the MSK071D-0450-FN-M2-UG2-RNNN motor is designed with increased concentricity and run out. The motor is supposed to be installed by trained personnel. It should only be used with approved accessories. The MSK071D-0450-FN-M2-UG2-RNNN weighs approximately 19.6 kilograms and is painted black. Its thermal class, according to EN 60034-1, is 155.