Product Description

The MSK070E-0300-NN-S3-BG0-NNAN synchronous servomotor offered by Bosch Rexroth has live connection points during and soon after operation. This motor must neither be opened nor disconnected in a pressurized state. The product should not feature salt mist, cutting oils, lubricants or coolants on its housing as they can cause corrosion. The device must undergo a unit test in accordance with EN 60079-15 specifications if safety-related components have been serviced and/or after repair. The unit depicts a sound pressure level of less than 75dBA. It comes with a winding code of 300. This motor features an encoder with a supply voltage of 7V to 12V.

The servomotor must not be commissioned if its operating states or connections are faulty. The commissioning of this product should take place only after checking if all its mechanical, as well as electrical connections, are intact. The device must be freed of its electrical connections only after discharging time of its electrical systems. The unit has chances of taking up to 140 minutes to cool down after it has been turned OFF. Its encoder permits indirect and absolute position recording. The cooling fins of the motor have to be cleaned regularly at regular intervals for a considerably high heat emission surface.

The bearings of this product are meant to be replaced if there are running noises or their service life has been reached. The protective conductor connection of the synchronous motor must be checked for tight seating and proper state at periodic intervals and replaced if needed. The device exhibits a very high temperature if there is an obstruction to its heat dissipation. The unit can be recycled without environmental hazards because of its high metal content. It is intended for installation in industrial machinery. This motor is delivered to any address irrespective of the country you live in with backup support for one year.