MSK070E-0150-NN-S1-UG1-NNNN

  • Rated 4.4 (9 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911312945
    In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The MSK070E-0150-NN-S1-UG1-NNNN is manufactured by Rexroth Indramat Bosch as part of the MSK Servo Motor Series. It features a continuous torque of 25.0 Nm and a continuous current of 7.0 A. It also displays a maximum torque of 70.0 Nmand a maximum current of 25.6 A and a winding inductive of 24,500 mH
✓ In-Stock!

Wake Industrial LLC is not an authorized distributor of this product.

MSK070E-0150-NN-S1-UG1-NNNN

  • Rated 4.4 (9 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911312945
    In-Stock, Ships Fast
  • Call for Expedited Shipping and Product Condition Options
The MSK070E-0150-NN-S1-UG1-NNNN is manufactured by Rexroth Indramat Bosch as part of the MSK Servo Motor Series. It features a continuous torque of 25.0 Nm and a continuous current of 7.0 A. It also displays a maximum torque of 70.0 Nmand a maximum current of 25.6 A and a winding inductive of 24,500 mH
Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

The Bosch Rexroth MSK070E-0150-NN-S1-UG1-NNNN synchronous servomotor is integrated with a holding brake. This motor features a 070 size code. The product is to be operated only after reading and understanding the usage and safety instructions. This device must be retained in its original state without any changes to its hardware configuration. The drive controller connected with the unit has to be programmed before it is started so that the motor performs the application-specific functions. The motor has to be assembled, mounted, installed and operated only according to the instructions specified in its documentation. The product is not designed to support operation underwater.

The device houses a holding brake that works on the electrically releasing principle. This unit is meant to be used only with the spare parts and accessories that have been approved by the manufacturer. Its grounding connection must be established before the operation takes place. The motor should be worked on for repairs or maintenance only after it has been disconnected from electric power. The product can trigger dangerous drive controller movements if it has firmware, operator or software errors. These dangerous movements can take place at any point of time during operation.

The motor uses the drive controller to control its holding brake. The product is equipped with a radial shaft sealing ring on its plain shaft. The device will need up to 140 minutes to cool down after it has been turned off. The unit can operate at a maximum temperature of 55°C. It must be ensured that its connectors are securely locked or tightened during its operation. This motor must undergo a unit test after it has been replaced and/or if its safety-related components have been serviced. The product exhibits leakage current over its conducting housing parts if the grounding connector in the motor cable is not connected properly. This MSK070E-0150-NN-S1-UG1-NNNN servomotor can be delivered to any location with a year’s Wake Industrial warranty.

  • MSK070E0150NNS1UG1NNNN
  • MSK070E 0150 NN S1 UG1 NNNN
  • MSK-070E-0150-NN-S1-UG1-NNNN
  • MSK70E-0150-NN-S1-UG1-NNNN

MSK070E-0150-NN-S1-UG1-NNNN Technical Specifications

Continuous Current at Standstill 100 K: 7.0 A
Continuous Torque at Standstill 100 K: 25.0 Nm
Maximum Current: 25.6 A
Maximum Torque: 70.0 Nm
Winding Inductivity: 24,500 mH
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo