Product Description

The MSK070E-0150-NN-S1-UG0-NNNN synchronous servomotor from Bosch Rexroth can be used in potentially explosive areas. This motor has a standard design. This product is used along with a drive controller offered by the same manufacturer. The device belongs to the MSK product group of such motors. The unit has an integrated optical encoder system. It may cause personnel injury or product damage if it is not handled properly. This motor portrays a broad power range. The product does not have any holding brake. The device is not meant to be used for applications other than those intended by the manufacturer. The unit should be operated only by qualified personnel.

The motor might cause the associated drive controller to move dangerously due to its faulty control. The product tends to have very hot housing during or immediately after operation. The device handling must be done using suitable protective equipment. The unit encompasses a grounding connection through a motor cable. It is designed for operation at an ambient temperature between 0°C and 40°C. This motor may trigger ignition sparks if its connectors are connected or disconnected under load. The housing of the product should be protected against corrosion all the time. This MSK070E-0150-NN-S1-UG0-NNNN synchronous motor has a one-year warranty tag.

The product must undergo an acceptance test if it has been changed or before the first startup of the system in which it is installed. The device tends to have a layer built on its surface over time if it is operated in an explosive dust atmosphere. This layer can affect the cooling mechanism of the unit. The motor is integrated with a single channel temperature monitor. The product comprises a type plate highlighting its type designation and technical details. The device features a compact design. This motor can be shipped to any address all over the world.