Product Description

Bosch Rexroth uses cutting-edge technology to create high-quality products. Among the products provided are synchronous motors, primary filters, drive controllers, and electronic controllers.

The MSK070E-0150-NN-M3-UG0-NNNN model can generate a substantial amount of maximum torque of 70 Nm while drawing just 25.6 A in peak current. The model is a long-term consistent servo motor with a plain output shaft and a sealing ring on top to prevent lubricants from permeating the shaft. The motor can operate at temperatures ranging from 0 to 40 ℃ and has a sound level of less than 75 decibels. The MSK070E synchronous motor is coated with a black varnish that is resistant to seawater, sewage, greases, and acids. The motor weighs 16.2 kilograms and features an optical encoder that tracks and monitors the rotor’s velocity and position. The model comes with a 240-degree rotating electrical plug and a natural convection-friendly housing, but no holding brake. The MSK070E synchronous motor may be mounted on a flange with the driving side facing up or down. The model can be put at a maximum height of 1000 meters above sea level should be relocated within temperatures ranging from -20 to +80 degrees Celsius. At 60 K standstill temperature, the model consumes a continuous current of 6.4 A and produces a continuous torque of 23 Nm.

The model MSK070E-0150-NN-M3-UG0-NNNN has an IP65 rating and a 155-insulation rating. The device's level of security is indicated by a two-digit number. The barrier to outside particle interactions is represented by the first digit. The level of water resistance is shown by the second number. The model has a thermal time constant of 32 minutes and can revolve at a maximum speed of 2200 revolutions per minute. At 20 degrees Celsius, the motor (MSK070E-0150-NN-M3-UG0-NNNN) has a torque constant of 3.94 Nm/A and winding resistance of 3.10 ohms.