Product Description

The MSK070C-0450-NN-S2-UG0-RNNN synchronous servomotor should be worked on with extreme care to lessen the risk of damage and accidents. The Bosch Rexroth motor should be lifted using equipment such as chain suspensions, eyebolts and lifting sling belts. The product must make use of screws and washers that adhere to the manufacturer’s specifications. The device is designed for B05 flange mounting. The protective sleeve on the shaft of the unit is meant to be removed only just before the mounting and installing process. It should be ascertained that the motor components are free of damage before the mounting is done. This motor must not have any jamming or clamping of its centering collar when it is being mounted.

The motor is designed to be used only as intended for safety purposes. The product should not be used without a drive controller. The device operation must be done in adherence to the ambient conditions indicated. The electrical connection points of the unit are never to be touched when it is turned ON. This motor may cause the associated drive controller to move dangerously if wrong parameters are input before the commissioning action. It has increased runout and concentricity according to DIN 42955 specifications. The servomotor utilizes an encoder with an EnDat 2.1 interface.

The product has four pole pairs. The operation of this device should take place between 0°C and 40°C. The unit can take up to 140 minutes to cool down after it has been switched OFF. The unit may portray ignition sparks when its connectors are either connected or disconnected under load. It is necessary to do an acceptance on the motor after a replacement has been done. The housing of this servomotor is not leakproof. This MSK070C-0450-NN-S2-UG0-RNNN synchronous motor along with a warranty for one year can be sent to any address irrespective of the country you live in.