Product Description

The MSK070C-0150-NN-M1-AG1-NNAN is an advanced servo motor. It is developed by Bosch for industrial applications. The motor includes an integrated multiturn absolute encoder with 128 signal periods. The function of the encoder is to measure motor parameters such as torque, speed and position. These measured parameters are then shared with the drive controller that controls the operation of the motor. The feedback enables the drive controller to monitor motor operating parameters and keep them in line with desired parameter values. The MSK070C-0150-NN-M1-AG1-NNAN also includes a 23 Nm rated electrically releasing holding brake. The brake on the motor releases when a 24 Volts DC signal is applied. The holding brake draws 0.79 Amps current. The maximum connection time of the motor brake is 35 milliseconds. The maximum disconnection time of the brake is 180 milliseconds.

The MSK070C-0150-NN-M1-AG1-NNAN cools via natural convection. The recommended temperature range for motor operation is 0 to 40 degrees Celsius. The performance of the motor derates by 20% if the temperature rises to 55 degrees Celsius. Operation of the motor above 55 degrees Celsius is not recommended and could lead to motor malfunction or failure. The connectors on the MSK070C-0150-NN-M1-AG1-NNAN can be rotted by 240 degrees. The main shaft on the MSK070C-0150-NN-M1-AG1-NNAN is smooth and includes a sealing ring. The housing of the MSK070C-0150-NN-M1-AG1-NNAN is IP65 rated. Because of this excellent protection rating which ensure total dust protection, the motor can be installed close to operating machinery. The approximate shipping weight of the MSK070C-0150-NN-M1-AG1-NNAN motor is 13.2 kilograms. The maximum electric motor speed is 2500 RPM. The number of pole pairs on the motor is six. The thermal time constant is 22 minutes.