Product Description

The MSK061C-0600-NN-S3-UP0-NNNN is a MSK series servo motor from Bosch. It includes several integrated features such as capacitive encoder, shaft with keyway and sealing ring and standard housing design. The protection rating of the MSK061C-0600-NN-S3-UP0-NNNN is IP65. This rating indicates that the motor housing is totally dust proof and is also safe from low-pressure jets of water. The motor can be installed outside cabinets which allows savings in installation costs and also makes troubleshooting easier. The MSK061C-0600-NN-S3-UP0- NNNN does not include a holding brake. Bosch does provide holding brakes for MSK motors which can be specified at the time of equipment ordering. The motor has separate connectors for power and feedback. Both of these connectors can be rotated by 240 degrees in either direction. The MSK061C-0600-NN-S3-UP0-NNNN motor cools through natural convection.

Detailed torque speed performance curves for the MSK061C-0600-NN-S3-UP0-NNNN motor are provided by Bosch in the product documentation. The thermal class of the motor is 155 according to EN 60034-1. The mass of the motor is approximately 8.3 kilograms. The sound pressure level produced by the MSK061C-0600-NN-S3-UP0-NNNN is always less than 75 dB. The maximum rated motor speed is 6000 RPM. Leakage capacitance of the motor components is 2.1 nanofarads. The inductance of the winding on the MSK061C-0600-NN-S3-UP0-NNNN motor is 6.7 millihenry. The resistance of the motor winding at 20 degrees Celsius is 1.55 Ohms. Centering diameter of the servo motor is 95 millimeters and the diameter of the motor shaft is 19 millimeters. Approximately 40 millimeters of the main motor shaft protrudes outside the motor housing. The length of the motor is 264 millimeters. Only trained and experienced personnel should install and operate the motor.