Product Description

The Bosch MSK061C-0600-NN-S3-UG1-NNNN is a synchronous servomotor. The motor is used as part of a closed loop control system for industrial applications. The motor is controlled by a drive controller that provides electrical power to the motor. In response to feedback from the motor, the drive controller also adjusts its output to ensure that motor parameters such as torque and speed match parameter values that are configured by the operator. The MSK061C-0600-NN-S3-UG1-NNNN includes an integrated capacitive singleturn encoder that can provide feedback within a single shaft rotation. The encoder requires 7 to 12 Volts DC input and draws maximum 50 milliamps current. The MSK061C-0600-NN-S3-UG1-NNNN also includes a 10 Nm rated holding brake. The holding brake is a safety feature that is designed to prevent shaft rotation from standstill.

The cooling method that the MSK061C-0600-NN-S3-UG1-NNNN is designed for is natural convection. The optimal environmental conditions for motor operation include 0 to 1000 meters elevation and 0 to 40 degrees Celsius temperature. The motor output derates if either the temperature exceeds 40 degrees Celsius or if the elevation exceeds 1000 meters. Bosch does not permit operation of the MSK061C-0600-NN-S3-UG1-NNNN motor at altitudes that exceed 3000 meters or at temperatures that exceed 55 degrees Celsius. Any equipment damage or personnel injury resulting from motor operation outside manufacturer recommended ambient conditions will not be the liability of the manufacturer. The main shaft on the MSK061C-0600-NN-S3-UG1-NNNN motor is plain and includes a seal. The protection rating of the MSK061C-0600-NN-S3-UG1-NNNN motor is IP65. The power connector and feedback connector on the motor are 240-degrre rotatable. Properly trained and experienced technical personnel should handle and install the motor and associated control equipment.