Product Description

The MSK061C-0600-NN-M2-UG1-RNNN synchronous servomotor from Bosch Rexroth is used with the manufacturer’s drive controller. The motor is used in general automation applications. The product must be handled appropriately to avoid property damage and personnel injury. The device belongs to the MSK product group of such offerings from the manufacturer. The unit is equipped with a high degree of protection. Its drive controller should be installed in accordance with the EMC requirements. The servomotor may cause the drive controller to move dangerously due to faulty control. The product has chances of having a very hot housing surface during operation. The device must neither be disconnected nor opened in a pressurized state.

The synchronous motor is designed to operate between 0°C and 40°C during operation. This unit is meant to be properly grounded by means of a motor cable before use. It is equipped with a holding brake. This holding brake must be used only when the servomotor is in standstill mode and performing a drive internal check. The motor has a high temperature resulting in an explosion hazard when it is overloaded. The product is equipped with a type plate that highlights its type designation and key technical details. This servomotor is available with its one-year warranty period.

The device has a high torque density. The unit is associated with a compact size. The details listed on its type plate can prove to be useful when a spare part is required or during service. The motor makes use of a multiturn absolute encoder. This encoder allows indirect and absolute position recording through 4,096 mechanical rotations. The holding brake in the motor has a holding torque of 10Nm. The servomotor is equipped with four pole pairs.  The product must be cooled down before maintenance. This device can be sent to your address through reputed freight carriers irrespective of the country you live in.